QUAD - FOAM MIST, WATER MIST AND GREEN-FOAM MIST BASED WHEELED SYSTEMS
Named after the four state-of-the-art Multi-Rotors working in sync in each container, the Ceasefire Quad brings together the efficiency of a fire extinguisher with the power of a hydrant system – without the drawbacks.
Harnessing water's immense cooling powers and multiplying them hundreds of times over, Ceasefire Quad breaks water down into a fine mist of under 80 microns. This mist is then thrown at the fire with a great kinetic force, covering a large surface area. As soon as the mist comes into contact with the fire, it instantly turns into steam. Enveloping the flames, cutting down the oxygen supply and reducing temperature to below combustion levels.
The Quad's Multi-Rotors, located within the mist generator, work in tandem, mixing water and air in a pre-set proportion to generate Watermist in the specially designed discharge gun. Thereby increasing the power of water by 400 times.
Meant for areas where fire risk is huge, or where large amount of combustible materials are stored, the trolley-mounted Quad can be taken anywhere with ease.
It is also an ideal extinguisher for closed environments, where unlike powder and other extinguishers, it doesn’t lose firefighting power. That’s cutting-edge technology at the very forefront.
Equipped with four Multi-Rotors in each container, it's fully capable of generating Watermist quickly and efficiently. Available in 25 Ltrs., 50 Ltrs., and 100 Ltrs, in Stainless Steel the Quad truly is a fire engine on wheels.-
Application: Fights Class A, B, C, F, and electrical fires. (May vary for different models of Quad)
-
Easy to use with quick activation: Being a stored pressure extinguisher it’s always ready to use.
-
Controllable discharge mechanism: The Ceasefire Quad fights fires with a lightweight dual-mode gun.
-
Braided Rubber Hose Pipe: This durable, long-lasting pipe doesn’t develop any cracks due to wear and tear.
-
Pressure gauge: Easy-to-read pressure gauge for ease of monitoring.
-
Stainless Steel Body: The extinguisher’s stainless steel body ensures that there is no chance of corrosion.
-
Hydrostatic pressure tested: This process ensures that your Quad performs perfectly. Because when it comes to a fire, there are no second chances.
-
Low-pressure, safe technology: Being a low-pressure extinguisher, there are no risks involved in case the extinguisher is used by mistake, even if people are around.
-
Safe on Humans: Since the Quad uses Watermist to suppress fires, it can safely be used around people. It makes an ideal extinguisher for places where there is high human traffic, like cinemas and auditoriums.
-
Environment friendly: The Quad uses bio-degradable foam in foammist and green foammist variants to fight fires. Making it an extinguisher that also protects the earth.
-
Anti-bacterial additive: This additive prevents any kind of bacterial growth in the water, keeping the water clean and fresh.
-
Certification: LPCB, BSI Kitemark, PED, MED, and UKCA-MED certified (May vary for individual models).
-
NOMENCLATURE FOR PORTABLE FIRE EXTINGUISHER FIRE EXT GREEN FOAM MIST 25L SS SP RED FIRE EXT FOAM MIST 25L SS JET SP RED (QUAD) FIRE EXT WATER MIST 25L SS SINGLE TROLLEY SP RED (QUAD) STORED PRESSURE / CARTRIDGE STORED PRESSURE STORED PRESSURE STORED PRESSURE AGENT TELESOLVE 0.5% TELESOLVE1% WATER THROW 10 METERS 10 METERS 4 METERS PRODUCT CODE CF-000750 CF-000744 CF-000741 CERTIFICATION TYPE EN1866, PED EN1866, PED EN1866, PED LPCB YES YES YES KITEMARK YES YES YES PED YES YES YES MED NO YES YES UKCA- MED NO YES NO GROSS WEIGHT (APPROX) APPROX. 66.50 KG APPROX. 66.50 KG APPROX. 65.00 KG NET MASS (APPROX) 23.75 TO 25.00 LTR 23.75 TO 25.00 LTR 23.75 TO 25.00 LTR HEIGHT OF FIRE EXT. (APPROX) 1075 MM 1075 MM 1075 MM DISCHARGE MECHANISM OPERATING LEVER (BALL VALVE) OPERATING LEVER (BALL VALVE) OPERATING LEVER (BALL VALVE) APPLICABLE ON FIRES CLASS A, B & ELECTRICAL STARTED FIRE CLASS A, B & ELECTRICAL STARTED FIRE CLASS A & ELECTRICAL STARTED FIRE FIRE RATINGS A, IIB A, IVB A CAN CONSTRUCTION DRAWN ROLLED AND MIG WELDED DRAWN ROLLED AND MIG WELDED DRAWN ROLLED AND MIG WELDED VALVE / CAP CONSTRUCTION FORGING AND MACHINING FORGING AND MACHINING FORGING AND MACHINING EXTERNAL COATING EPOXY POLYESTER POWDER COATING EPOXY POLYESTER POWDER COATING EPOXY POLYESTER POWDER COATING WARRANTY IN YEARS 1 1 1 G.A. DRAWING NUMBER CF/SP-GFM25/GA/01 CF/SP-FM25/GA/01 CF/SP-WM25/GA/01 WORKING PRESSURE 15BAR 15BAR 15BAR DIA. OF SHELL (OD) 300.0 MM 300.0 MM 300.0 MM OPERATING TEMPERATURE 5OC TO +55OC 5OC TO +55OC 5OC TO +55OC HYDROSTATIC TEST PRESSURE 30BAR 30BAR 30BAR CYLINDER MATERIAL SPEC. SS 304 (1.4301) SS 304 (1.4301) SS 304 (1.4301) BODY THICKNESS (APPROX) 1.8 MM 1.8 MM 1.8 MM *Specifications can change without notice due to our continuous R&D and product improvisation initiatives.
NOMENCLATURE FOR PORTABLE FIRE EXTINGUISHER FIRE EXT GREEN FOAM MIST 50L SS SP RED FIRE EXT FOAM MIST 50L SS JET SP RED (QUAD) FIRE EXT WATER MIST 50L SS SINGLE TROLLEY SP RED (QUAD) STORED PRESSURE / CARTRIDGE STORED PRESSURE STORED PRESSURE STORED PRESSURE AGENT TELESOLVE 0.5% TELESOLVE1% WATER THROW 10 METERS 10 METERS 4 METERS PRODUCT CODE CF-000751 CF-000745 CF-000742 CERTIFICATION TYPE EN1866, PED EN1866, PED EN1866, PED LPCB YES YES YES KITEMARK YES YES YES PED YES YES YES MED NO YES YES UKCA- MED NO YES NO GROSS WEIGHT (APPROX) APPROX. 107.50 KG APPROX. 107.50 KG APPROX. 106.80 KG NET MASS (APPROX) 47.50 TO 50.00 LTR 47.50 TO 50.00 LTR 47.50 TO 50.00 LTR HEIGHT OF FIRE EXT. (APPROX) 1200 MM 1200 MM 1200 MM DISCHARGE MECHANISM OPERATING LEVER (BALL VALVE) OPERATING LEVER (BALL VALVE) OPERATING LEVER (BALL VALVE) APPLICABLE ON FIRES CLASS A, B & ELECTRICAL STARTED FIRE CLASS A, B & ELECTRICAL STARTED FIRE CLASS A & ELECTRICAL STARTED FIRE FIRE RATINGS A, IVB A, IVB A CAN CONSTRUCTION DRAWN ROLLED AND MIG WELDED DRAWN ROLLED AND MIG WELDED DRAWN ROLLED AND MIG WELDED VALVE / CAP CONSTRUCTION FORGING AND MACHINING FORGING AND MACHINING FORGING AND MACHINING EXTERNAL COATING EPOXY POLYESTER POWDER COATING EPOXY POLYESTER POWDER COATING EPOXY POLYESTER POWDER COATING WARRANTY IN YEAR 1 1 1 G.A. DRAWING NUMBER CF/SP-GFM50/GA/01 CF/SP-FM50/GA/01 CF/SP-WM50/GA/01 WORKING PRESSURE 15BAR 15BAR 15BAR DIA. OF SHELL (OD) 350.0 MM 350.0 MM 350.0 MM OPERATING TEMPERATURE 5OC TO +55OC 5OC TO +55OC 5OC TO +55OC HYDROSTATIC TEST PRESSURE 30BAR 30BAR 30BAR CYLINDER MATERIAL SPEC. SS 304 (1.4301) SS 304 (1.4301) SS 304 (1.4301) BODY THICKNESS (APPROX) 2.0 MM 2.0 MM 2.0 MM *Specifications can change without notice due to our continuous R&D and product improvisation initiatives.
NOMENCLATURE FOR PORTABLE FIRE EXTINGUISHER FIRE EXT GREEN FOAM MIST 100L SS SP RED FIRE EXT FOAM MIST 100L SS JET SP RED (QUAD) FIRE EXT WATER MIST 100L SS SINGLE TROLLEY SP RED (QUAD) STORED PRESSURE / CARTRIDGE STORED PRESSURE STORED PRESSURE STORED PRESSURE AGENT TELESOLVE 0.5% TELESOLVE1% WATER THROW 10 METERS 10 METERS 4 METERS PRODUCT CODE CF-000752 CF-000746 CF-000743 CERTIFICATION TYPE EN1866, PED EN1866, PED EN1866, PED LPCB YES YES YES KITEMARK YES YES YES PED YES YES YES MED NO YES YES UKCA- MED NO YES NO GROSS WEIGHT (APPROX) 166.70 KG 166.70 KG 166.20 KG NET MASS (APPROX) 95.00 TO 100.00 LTR 95.00 TO 100.00 LTR 95.00 TO 100.00 LTR HEIGHT OF FIRE EXT. (APPROX) 1615 MM 1615 MM 1615 MM DISCHARGE MECHANISM OPERATING LEVER (BALL VALVE) OPERATING LEVER (BALL VALVE) OPERATING LEVER (BALL VALVE) APPLICABLE ON FIRES CLASS A, B & ELECTRICAL STARTED FIRE CLASS A, B & ELECTRICAL STARTED FIRE CLASS A & ELECTRICAL STARTED FIRE FIRE RATINGS A, IVB A, IVB A CAN CONSTRUCTION DRAWN ROLLED AND MIG WELDED DRAWN ROLLED AND MIG WELDED DRAWN ROLLED AND MIG WELDED VALVE / CAP CONSTRUCTION FORGING AND MACHINING FORGING AND MACHINING FORGING AND MACHINING EXTERNAL COATING EPOXY POLYESTER POWDER COATING EPOXY POLYESTER POWDER COATING EPOXY POLYESTER POWDER COATING WARRANTY IN YEAR 1 1 1 G.A. DRAWING NUMBER CF/SP-GFM100/GA/01 CF/SP-FM100/GA/01 CF/SP-WM100/GA/01 WORKING PRESSURE 15BAR 15BAR 15BAR DIA. OF SHELL (OD) 400.0 MM 400.0 MM 400.0 MM OPERATING TEMPERATURE 5OC TO +55OC 5OC TO +55OC 5OC TO +55OC HYDROSTATIC TEST PRESSURE 30BAR 30BAR 30BAR CYLINDER MATERIAL SPEC. SS 304 (1.4301) SS 304 (1.4301) SS 304 (1.4301) BODY THICKNESS (APPROX) 2.0 MM 2.0 MM 2.0 MM *Specifications can change without notice due to our continuous R&D and product improvisation initiatives.