
Sistema de extinción de incendios para cocinas ULtra X con certificación UL
INTRODUCCIÓN
ACABA CON LOS INCENDIOS EN LA COCINA CON ULTRA-X
Incluso las cocinas comerciales e industriales con el mantenimiento más meticuloso y la gestión más eficiente pueden sufrir imprevistos. Por muchas precauciones que se tomen, el fuego es inevitable, ya que se utiliza para cocinar, junto con una gran cantidad de electrodomésticos y materiales inflamables.El sistema de extinción de incendios Ultra-X para cocinas comerciales de Ceasefire es una solución de ingeniería automatizada de vanguardia, diseñada para abordar los riesgos de incendio específicos de las cocinas comerciales. El sistema cuenta con la certificación UL 300 y cumple con las directrices NFPA 96/17A.
¿QUÉ HACE QUE LA SERIE ULTRA-X DE CEASEFIRE SEA DISTINTA?
Opciones de detección:
El sistema ofrece tres tipos de detección y opciones de configuración de activación para adaptarse a cualquier aplicación en la cocina.
A. Activación eléctrica
La detección inteligente basada en LHS activa el sistema automáticamente cuando la temperatura alcanza un nivel predefinido en caso de incendio en un electrodoméstico.
Detección por sonda
El sistema también puede configurarse con el módulo de detección controlado por detector de sonda, que crea un efecto de conmutación y se activa automáticamente a una temperatura predefinida.
B. Fusibles de activación mecánica
Al activarse por calor, las dos mitades del fusible se separan, activando el sistema para descargar el agente sobre el electrodoméstico incendiado.
C. Sistema híbrido
El sistema híbrido utiliza una detección mecánica basada en fusibles y la activación es en parte mecánica y en parte eléctrica. El sistema puede activar simultáneamente hasta cuatro contenedores de agente activados mecánicamente y hasta seis contenedores activados eléctricamente.
2. Solo dos tipos de boquillas
El sistema de supresión de humos para cocinas Serie Ultra-X de Ceasefire utiliza solo dos tipos de boquillas para todas las configuraciones y aplicaciones, lo que simplifica el diseño y lo hace a prueba de errores.
a. Boquilla de 15 grados para el plenum.
b. Boquilla de 40 grados para todo tipo de equipos.
Con solo dos tipos de boquillas, el sistema puede configurarse para proteger todo tipo de electrodomésticos, manteniendo un caudal constante. Esto supone una gran ventaja para el chef, que puede intercambiar fácilmente los electrodomésticos sin cambiar la disposición del sistema ni el tipo de boquilla.
El sistema, que utiliza solo dos tipos de boquillas, también simplifica enormemente la instalación y el mantenimiento.
3. Protección continua/superpuesta
Una característica única de los sistemas de supresión de humos para cocinas de Ceasefire, con certificación UL, es que pueden diseñarse para protección grupal o superpuesta/continua.
La protección grupal se requiere cuando se necesita proteger un conjunto de electrodomésticos como un todo. Por otro lado, la protección continua/superpuesta se requiere cuando se desea proteger uniformemente todo lo que se encuentra debajo de la campana. Esto permite al chef mover los electrodomésticos o el área caliente/fría bajo la campana a su gusto.
4. Protección localizada
A diferencia de la protección continua, el sistema también puede configurarse para proteger puntos específicos bajo la campana extractora mediante una sola boquilla, si es necesario. Esta configuración es ideal cuando el electrodoméstico o la zona de cocción bajo la campana extractora son fijos.
5. Tecnología de Presión Almacenada Monitoreable
El sistema Ceasefire es un sistema monitoreable de presión almacenada, no solo porque el agente se prepresuriza en el contenedor, sino también porque se libera directamente mediante la activación de la válvula, ya sea mecánica o eléctricamente.
Los sistemas Ceasefire incluyen, entre sus dispositivos de monitoreo, interruptores de presión, manómetros e interruptores de manómetros, opciones que permiten la monitorización visual y electrónica del sistema, controlándolo las 24 horas del día, los 365 días del año.
Esta es una gran ventaja sobre muchos sistemas de presión almacenada disponibles en el mercado, que se activan neumáticamente mediante un cartucho externo, no cuentan con un mecanismo de monitoreo y no pueden proporcionar información de disponibilidad del sistema en tiempo real.
6. Opciones de diseño estéticamente agradables y fáciles de usar para chefs
Los sistemas de supresión de cocinas de Ceasefire, con certificación UL, están diseñados estéticamente con un enfoque de instalación y ubicación universal, lo que garantiza su adaptabilidad a diferentes diseños y requisitos de cocina. Las boquillas, ubicadas en la parte frontal o lateral de la campana extractora, y su versatilidad de altura, mejoran la comodidad y la eficiencia operativa del chef.
7. Agente extintor potente y ecológico
El sistema utiliza un potente agente humectante de origen vegetal, capaz de extinguir rápidamente diversos tipos de incendios en la cocina en cuestión de segundos. Su biodegradabilidad aumenta su respeto por el medio ambiente.
El agente cumple con la normativa REACH y no contiene sustancias extremadamente preocupantes (SVHC).
8. Múltiples opciones de tuberías
Existen múltiples opciones de tuberías según las necesidades del cliente:
A. Instalación rápida con accesorios de compresión
Los accesorios de compresión facilitan la instalación del sistema con un tiempo de respuesta mínimo. Esto también facilita el mantenimiento del sistema al simplificar la instalación y desinstalación de sus componentes.
B. Tuberías rentables
La instalación del sistema también puede realizarse con tuberías de cromo negro, lo que la hace rentable.
C. Conectividad multicilindro mediante colector
El sistema permite conectar varios contenedores a través de una única línea de suministro, lo que elimina la necesidad de líneas de suministro individuales que vayan desde el contenedor de agente hasta la campana extractora. Esto reduce el tiempo, los costos de tuberías y la mano de obra, a la vez que garantiza una instalación impecable del sistema.
9. Enlaces fusibles con cableado continuo
Los sistemas de accionamiento mecánico ofrecen la opción de utilizar los exclusivos enlaces fusibles de Ceasefire con cableado continuo en lugar de los de tipo gancho en S. Este sistema de enlaces fusibles con disposición de cable continuo lleva la detección y la fiabilidad del sistema a un nivel superior.
10. Integración con terceros
El sistema, con tres microinterruptores SPDT o DPDT en la Unidad de Actuación Mecánica (MAU), elimina la necesidad de relés adicionales para integraciones con terceros. Algunos ejemplos de integraciones con terceros que se pueden realizar con el sistema incluyen:
- Apagado de aparatos eléctricos
- Apagado del aire de reposición
- Apagado de la válvula de gas
- Interruptor de derivación/relé
- Activación de alarmas (sirena/luz estroboscópica/sensor de nivel de aceite/sistema de gestión de edificios, etc.)
- Desactivación del solenoide (activación de la válvula de cierre de gas y de la válvula de cierre de gas)
11. Protege una amplia gama de equipos y electrodomésticos
Probado para garantizar su rendimiento y seguridad en una amplia variedad de equipos y electrodomésticos de cocina.
12. Capaz de proteger campanas extractoras de cocina de todos los tamaños
Los sistemas de supresión de humos para cocinas de la serie Ultra-X de Ceasefire pueden proteger desde campanas extractoras de cocina de 800 mm de longitud con un mínimo de 3 boquillas hasta campanas extractoras de 7 m de longitud con un máximo de 18 boquillas, con un sistema de un solo contenedor, lo que proporciona una protección completa. Para campanas extractoras de mayor tamaño, el diseño permite añadir hasta cuatro contenedores a un colector e instalar hasta 26 boquillas.
13. Totalmente conforme con la norma EN 16282-7
El cumplimiento de la norma EN 16282-7 garantiza que su sistema de supresión de humos para cocina se instale y mantenga conforme a los estándares de calidad más exigentes.
Ceasefire ULTRA-X is among the very few kitchen fire suppression systems globally that is certified across multiple leading certification bodies- meeting some of the highest and most stringent standards in the world.
-
A rare combination of UL 300, EN 17446, LPCB (LPS 1223), and NFPA 96/17A aligned standards, reflecting one of the highest global benchmarks in kitchen fire safety
-
Proven to perform effectively in real-world, high-grease commercial kitchen fire scenarios, not just controlled laboratory conditions
-
Delivers rapid flame knockdown, cooling, and re-ignition prevention validated against some of the world’s most stringent fire suppression standards
-
Ensures high system reliability, discharge consistency, and dependable performance through rigorous third-party testing and certification
-
Supports global acceptance, enhanced insurability, and future-ready compliance for premium, high-risk, and international commercial kitchens
-
In the event of a fire, when the temperature rises to a predefined level the detection module kicks into action to trigger the system. The fire detection module in the Ceasefire Ultra-X System could either be Electrical Triggered or Mechanical Fusible Links based.
Electrical Detection:
In case of an Electrically triggered system, the Linear Heat Sensing Cable or Probe detector senses the fire when the temperature rises to a predefined level creating a switching effect and
signalling it to the control panel. The control panel in turn triggers the system by activating the solenoid valve on the container head.Mechanical Detection:
The Mechanically activated system gets activated when the two halves of the fusible link separate when the temperature reaches a predefined level due to fire. This mechanically triggers the
system via the Mechanical Actuation Unit and activates the valve on the container head, releasing the agent.Hybrid System:
In the hybrid system the detection is mechanical and the activation is part mechanical and part electrical. A fusible link based detection network actuates up to four (4) mechanically activated containers using the piercing pin mechanism and up to six (6) electrically activated (solenoid valve based) containers using a power-signal
from the power adaptor via the micro-switch in the Mechanical Activation unit.System Activation and Suppression:
Activation through either of the above two detection methods results in the agent being discharged through a dedicated discharge line via specialised nozzles leaving no blind spots. The system is designed to give full protection against fire under the hood, plenum, and duct area.
Once activated, the gas shut-off valve which is an integral part of these systems instantly shuts down the gas supply to the appliances, ensuring complete safety of the premise.
The systems can also be configured to cut off the power supply to an electrically powered cooking appliance, in case that is being used.
The systems are equipped with at least one Manual Pull Station that provides immediate response capabilities, backing up the automatic suppression system.Electrical Systems also come with the provision of a manual call point.
Ceasefire Ultra-X Kitchen Suppression System uses the greenest and the most sustainable extinguishing agent in the category. The extinguishant is a potent wetting agent that is derived from 100% biodegradable vegetal extract.
The agent also meets the REACH Compliance and does not contain SVHC (Substance of Very High Concern) making it extremely low on eco-toxicity and free of phosphate.This makes the agent one-of-its-kind to not only extinguish all types of kitchen fires rapidly but also do so without causing any harm to the environment.
The Ceasefire Ultra-X extinguishing agent is neutral, non-acidic or alkaline to harm anyone and is absolutely safe for humans. It has no record of causing any irritation to eyes, skin or respiratory tract on ingestion and is not classified as a hazardous product.
The Ceasefire Agent is also safe to be disposed off after use by simply washing it off the drain as it is well tolerated by sewage plant treatment operations.
Choice of 3 Detection and Activation Modules: Electrical, Mechanical and Hybrid.
Electrical Cut-Off Valve: The systems can be configured to cut
off the power supply to an electrically powered appliance, in case an
electrical appliance is being used for cooking.Versatile Nozzle Design: Only two nozzle types for all system
configurations and applications. Metal caps on nozzles ensure
protection against grease deposits & obstructions.Continuous/Overlapping Protection: Can be designed for Group or
Overlapping/ Continuous Protection.Spot Protection: Can also be configured to protect specific spots under the hood.
Monitorable Stored Pressure Technology: True stored pressure technology with a pressure gauge on the agent container with a port for pressure switch, allowing integration with various third-party devices.
Chef-Friendly & Aesthetically Pleasing Design Options: Designed aesthetically with a universal installation and placement approach, ensuring its adaptability to different kitchen layouts and requirements. The nozzle placement adds to the chef's convenience and operational efficiency.
Highly Versatile System: One system design that protects an extensive range of cooking appliances and different fuel types.
Highly Potent and Eco-Friendly Agent: Highly potent 100% biodegradable wetting agent which meets the REACH Compliance and does not contain SVHC (Substance of Very High Concentration).
Multiple Piping Options: Multiple options to suit customer needs - Rapid installation using Compression Fittings , Cost-effective Pipelines and Multi Cylinder Connectivity Using Manifold.
Continuous Wire Arrangement Based Fusible Links:
Unique continuous wire arrangement based fusible link options ensure better detection & compete reliability.Third Party Integration: Three SPDT or DPDT microswitches in the Mechanical Actuation Unit (MAU) allows for a wide variety of third party device integration.
Ease of Shipping: Non-hazardous agent with no markings required makes it convenient for shipping and portability.
Stainless Steel Agent Containers: Stainless Steel epoxy coated
containers ensure rust-free and trouble-free operation in the long
run.UL Listed: Meets the Underwriters Laboratory standard UL 300 and as demanded by NFPA 17A, NFPA 96
Ceasefire’s Ultra-X Series Wet Chemical based Commercial Kitchen Fire Suppression System is configurable to protect kitchen hoods of different lengths. From the smallest size of 800mm up to 7m with a single container, providing total protection.
The table below explains the various system configurations possible w.r.t to the container size, agent capacity, and the number of nozzles deployed in the system. Each nozzle is capable of protecting upto 800*800mm of space
under the hood.Single Cylinder System Configurations
Cylinder Size
Agent Capacity
Nozzles
14 ltr
9 ltr
3
18 ltr
12 ltr
4
22 ltr
16.5 ltr
5-7
27 ltr
20 ltr
6-10
32 ltr
24 ltr
8-12
44 ltr
30 ltr
10-14
64 ltr
45 ltr
15-18
Multiple Cylinder System Configurations
Cylinder Size
Agent Capacity
Nozzles
2 x 14 ltr
2 x 9 ltr
8
3 x 14 ltr
3 x 9 ltr
11
4 x 14 ltr
4 x 9 ltr
14
2 x 18 ltr
2 x 12 ltr
10
3 x 18 ltr
3 x 12 ltr
14
4 x 18 ltr
4 x 12 ltr
19
2 x 22 ltr
2 x 16.5 ltr
13
3 x 22 ltr
3 x 16.5 ltr
20
4 x 22 ltr
4 x 16.5 ltr
26
2 x 27 ltr
2 x 20 ltr
16
2 x 32 ltr
2 x 24 ltr
19
About EN 16282-7
“EN 16282-7 is a European Standard that lays forth the technical safety, ergonomic, and hygienic standards for the design, manufacture, and use of kitchen ventilation hoods. The ventilation systems in commercial kitchens, related spaces, and other facilities processing meals meant for commercial use must comply with this European Standard. Kitchens and associated areas are special rooms in which meals are prepared, where tableware and equipment is washed, cleaned, food is stored and food waste areas. A process for verification of each requirement is also well-defined.
By establishing uniform rules for performance testing, servicing & maintenance, and danger classifications such as fire, the new technical standard assists in bringing uniformity in regulations across the industry. The standard helps to better protect people, property, and businesses by bringing the restaurant industry closer to more effective commercial kitchen fire prevention.”
